Eyebrow, Youbrow

So you say you're planning to wear a pink wig but skip the light fandango, mister! Your eyebrows are not pink! No one has naturally pink eyebrows! Oh dear. What to do? If you're like me (lazy and poor) you probably don't want to bleach or dye your eyebrows to match your wig. Especially because chances are you're only going to wear your wig for a day or two. And when you take it off to go back to work or school or some other place filled with people not wearing stormtrooper outfits, what the heck are you going to do with pink eyebrows?

To that end, here's a cheap and easy way to temporarily change your eyebrow color. It's not the most natural look ever, but it works and it's something anyone can do. I do think it'll work best if you have thin, groomed eyebrows. I don't have the ideal brow for this myself. My eyebrows are somewhat thick and dark, and I was trying to turn them white. So I think the fact that this worked reasonably well for me despite all that means it would work quite well for other people.



What you need:

Elmer's School Glue - This is the standard Elmer's glue you used on all your school projects when you were 8. (Some of you probably also ate it, which is okay because it's non-toxic. Though not especially nutritious.) Make sure it says washable on the bottle. If it DOESN'T say washable it is THE WRONG GLUE and you should NOT put it on your face.

Acrylic Paint - Any brand is fine. Feel free to mix colors to tweak the shade just like you would if you were going to paint something other than your facial
hair.

What to do:

1) Put on your other makeup first. I tried this a couple ways, and it worked better when I didn't put it over any makeup at all. So if you have the option of not putting makeup on the area around your eyebrows, that's what I suggest. If you don't have that option, just make sure to put any other foundation, eyeshadow, or body paint on before you do your eyebrows.

2) Cover your eyebrows in Elmer's Glue. What I did was squeeze a line of glue right onto my eyebrow and then spread it with my fingers. A paintbrush would also work I think. Don't worry about the glue getting stuck in your eyebrows. If you got the right glue, I promise you it will wash out with soap and water. You'll want to cover your eyebrows completely, but don't overdo it. Try not to go onto the skin around your brows too much, and try not to coat them overly thickly. The thicker you lay on the glue, the less natural it's going to look. (But note you DO want to cover them completely because you want the paint on the glue not on your actual hair.)

3) Wait for the glue to dry. Think 10ish minutes. If you did more than one coat of glue it may take a bit longer.

4) Brush the acrylic paint onto your eyebrows with a paint brush. Again, a lighter touch is better. Since I do have thick brows and I was trying to go from black to white, I tried really slathering it on at first to cover all the black. But I think it's ultimately better to have a little bit of the old color showing through than to have a solid, plastic looking mass of glue and paint. You want to cover the old color, but you also want to limit yourself as much as possible to the hair itself without spreading out to the skin around the brow. Basically you still want your eyebrows to look somewhat like they're made of hair, and if you go too far overboard they won't. Once you're happy with it, let the paint dry. It should take less time than the glue.

And that's it. Your eyebrows are now a whole new color!

5) When you're ready to return to your normal citizen costume, wash your eyebrows with soap and warm water. (Cold water is okay for this too, I just think warm water is nicer.) You may have to comb through your eyebrows a bit with your fingernails to get all the glue out, but I've done this a couple times and I promise you will not have to shave off your eyebrows. Washable glue. It WILL wash out.

Wig Dying for Dummies

I found this method for wig dying on cosplay.com and tested it out when I was doing a Stormer costume. It worked great, so I'm sharing the knowledge. Because you never know when you'll have a wig color emergency.

Before and After.

The hair in a wig is generally made of plastic. Unless it's an expensive human hair wig, which I know nothing about because they're too expensive for me to have. So presuming that you're poor like me, and working with a synthetic wig, regular old hair dye isn't going to work. Being as it's designed for regular old hair that is not made of plastic. Here's what you need instead:

1. Acrylic ink. (Ink, not paint - this is important! You can find this at your local craft store. Or online.)

2. A cup of rubbing alcohol. (You can find this in your medicine cabinet.)

3. A spray bottle. (The dollar store is your friend.)

Some of the inks come with a dropper inside the top. I used two brands: FW and Speedball. The FW had a dropper, the other didn't. The dropper does make it easier to use, and you may want to pick up some disposable pipettes if you don't have the dropper. Otherwise, just rely on your best guesstimation. If you have a dropper, the recommended ratio of ink to alcohol is 8 full squeezes of ink for each cup of alcohol. Obviously this is not an exact science. Just mix the ink and alcohol in the spray bottle until it seems to be the shade you want. You can use different colored inks to tweak the color. And testing it out on lock of your wig's hair wouldn't be a bad idea.

For my wig I used 3/4 cup of alcohol and about 6-7 squeezes of ink, and I ended up with leftover ink mixture. But I was also turning an aqua wig blue, so I wasn't worried about total coverage, and there are some spots where the old color is still visible. The amount you'll need really depends on how much hair you need to cover.

Please note. You can't dye a wig lighter. So for instance if you started with a red wig you wouldn't be able to turn it pink, and if you started with a black wig you wouldn't be able to turn it any other color. The color you have underneath can affect the final color somewhat so for the purest color you want to start with a white wig. Blond will also take the color well, and medium colors like my blue wig in this post will also take the color but they will only go darker. Always start with a lighter wig and dye darker.

After you have your mixture, set your wig up outside. I used the ultra fancy method of putting a broomstick in a jug of water and propping the wig on the broomstick. This is not the best method if it's windy. Also it looked like I had scalped a muppet and hung it up as a warning to other muppets. (Muppets need to be kept in their place.) Once you get your wig propped up somewhere, somehow you can start spraying.

Make sure you're either somewhere that overspray and runoff don't matter, or you have something on the ground to catch the mess. It WILL make a mess. The ink got all over my hands, but if you wash it right away it doesn't really stain. (It doesn't stain HANDS, for clothes there could be more of a problem. Don't wear your favorite white shirt.)

Let the wig dry. On cosplay.com they said something like 8 hours, but I did more like 2 with no problems. Rinse the wig out with water. Let it dry again. And brush it out. If you use a lot of ink you may have to rinse and brush more than once to get the crinkliness out; but even before brushing, I was really happy with the texture and shine on mine. There was some minor stiffness before brushing, but not too much.

And there you go. A few easy steps and you too can have a hair color not found anywhere in nature.

*

ETA: I've been getting a lot of questions in the comments, so let me just stress a couple things.

1) YOU CANNOT DYE A WIG LIGHTER WITH THIS METHOD. You can only dye a darker color than what you're starting with.

2) RIT dye does not work better than acrylic ink. There's some info about it in the comments where I tested it out. And granted the quality of the wig I used was terrible, but it didn't hold the color as well at all. Just so you know.

3) This is not an exact method. This is all based on guesstimation. If you want to play around with the mixture or you want to try something besides a spray bottle that's fine. Just try to test it out on a little bit of the wig first if you can. That's your best way to figure out how it's going to work.

4) I AM NOT AN EXPERT! I really can't tell you which colors you need to use to get a specific effect, and I've never tried to do highlights or dye with two different colors or anything complex like that. While I think a lot of things are POSSIBLE with this method, I haven't tested most of them, so it's really going to be up to you to play with the possibilities and use a little trial and error.

I don't mind trying to answer any questions you have, but I can't give you much more information than what's in this post. Your best bet to find out what's possible and what you can do is just to experiment.